Tecmate OPTIMATE PRO 1 DUO 12B 10A BATTERY CHARGER

With EU wall plug. Professional variable 0.4A to 10A 12V diagnostic battery charger-tester & power supply for powersport & small craft / machine professionals, repair shops and battery retailers. - Pro use: 12V lead-acid STD & AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah. - Normal use: 12V lead-acid STD & AGM from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah. - Charging Amps: 0.4A to 10A variable (Ampmatic) - Charging Volts: 12V lead-acid: 0.5V to 22V. 12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V. Powersupply: 11V to 13.6V. - Operation: selectable - 11 step charger - 3 Selections: Select a charge mode for 12V lead-acid OR 12.8V LiFePO4, or select PowerSupply mode for battery support during vehicle diagnostics, tuning or troubleshooting - Automatic fast battery activation: flashing green test light indicates battery is healthy and sufficiently charged - Smart recovery mode for deep discharged batteries, a bad battery is quickly identified, a good battery receives charge is retested after - Pushbutton activated BMS reset for LiFePO4 batteries - Test indication for GOOD (80 to 100%), OK (60 to 80%) and BAD (below 60%) batteries - Powersupply mode provides constant power for vehicle tuning, diagnostics and troubleshooting - Case with rubber bumbers, with wall-mount or hanger bars. AC Class 2 input socket, with ON/OFF switch, 15cm / 6″ output cord - Certification - CE, UKCA, NRTL (UL & CSA), PSE (Japan), SAA (Aus & NZ) - Indoor use. IP40 rating - Included cables: Class II AC cord suitable for region, O-43 charge lead extender 180cm/72″ and O-14 fused battery clips - Vehicle hanging hook and wall receiver included