English
Italiano 
Deutsch 
Français 
YAMAHA YZF R1 2009/11 Secondary Fuel Module
Brand:
Enter the Power Commander V Secondary Fuel Module. The S.F.M. connects to the upper injector rail using OEM connectors. From there, it is only a single cable connection to the PCV
Limited special offer
CHF288.00
(VAT incl.)
CHF320.00
-10%
Reference:
SBK_13862
Add to compare0
-
- Enter the Power Commander V Secondary Fuel Module. The S.F.M. connects to the upper injector rail using OEM connectors. From there, it is only a single cable connection to the PCV. Once connected, you will be able to adjust both upper and lower injectors by as much as +250/-100%. If the gear position input is connected on your PCV you will have the ability to adjust all of the injectors on a “per gear” basis (a complete map for every gear) as well as the ability to map each injector separately. That gives you up to 48 complete maps! There will also be a "basic" mode that allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time. For those of you that have modified engines that require more fuel than 4 injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately, this setting is for you. In addition to the increased fuel adjustability the SFM provides, it also allows for the use of the Dynojet Quick Shifter sensor on 8 injector bikes. On earlier Power Commanders an Ignition Module or Stand Alone Ignition Quick Shifter was necessary to use the DQS on bikes with 8 injectors. Now, you can have both added fuel control and shifter functionality at a very low price.
Other products in the same category
-
CHF322.00 (VAT incl.) -
CHF305.50 (VAT incl.) -
CHF300.00 (VAT incl.) -
CHF239.00 (VAT incl.) -
CHF414.00 (VAT incl.) -
CHF280.00 (VAT incl.)
